Demister mesh pad applys in Vacuum Tower,Absorber

Demister applys in Vacuum Tower,Absorber, Gas separator, Scrubber,Distillation and Dust collector.

Metallic Mist Demister:

Mist eliminators are made up from knitted materials with interlocking asymmetrical loops of metal or plastic with typical wire diameters being 0.1 – 0.3mm. By careful choice of wire diameter, Knitwire Products have produced knitted mesh mist eliminators with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.

Along with wire diameter and mesh density, another important parameter in design and operation is the vapour velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals.

1. It show 99% efficiency under general condition and velocity (1-3 m/sec or higher)

2.Over 98% open area is guaranteed under any conditions so pressure drop caused by the use of the demister can be disregraded(0.1-1.0 W/G)

3.It can be made of any matirial suitable for the given temperature and corrosion -resistance

4.it is easy to installation and handle

5.there is no restriction in the condition , place, and size for use

6.Self-cleaning is possbile

Material:

1.SUS 304,304L,SUS316, 316L, Monel

2. PP or PE

3. Glass fiber

Fixing method & Grid

It should be horizontally fixed and supported.At the bottom or both the top and the bottom, a support grid which is welded  material is same with Demister.

Application

1. Vacuum Tower -The treatment quantity by the demister goes up by 35%, the quality of liquid & gas is improved

2.Absorber

3.Seperator vessels

4.Evaporator

5.Scrubber

6.Distillation

7.Dust Collector

Demister+fixed Grid

Demister mesh pad applys in Vacuum Tower,Absorber