Ceramic Structured packings for rectification, absorption

Ceramic Structured packing applys in rectification and absorption of corrosive mixture on the occasion of strict requirements.

]

Ceramic  tower Packings/ Structured packings:

The high performance ceramic structured packing is constructed of corrugated sheets of ceramic. The angle of inclination of the corrugations of adjacent sheets is reversed with respect to the vertical column axis, forming mixing cells at every points where the corrugation intersect. This promotes intimate mixing and radial distribution of the liquid and gas streams. Each subsequent element is rotated about the column axis so that the sheets of one element are opposed to the sheets of the elements above and below. In passing through each element , gas and liquid are thoroughly mixed in the direction parallel to the plane of the sheets. By rotating subsequent elements, excellent mixing and spreading, both side to side and front to back are obtained over the entire cross section of the tower. The flow characteristics developed by the structured geometrical arrangement creates high effective surface area resulting in good efficiency as compared to other mass transfer devices.

Index	Value
SiO2	≥72%
Fe2O3	≤0.5%
CaO	≤1.0%
Al2O3	≥23%
MgO	≤1.0%
Other	2%

Index	Unit	Value
Specific gravity	g/cm 3	2.5
Water absorption	Wt%	≤0.5
Acid resistance	Wt%	≥99.5
Loss in burn	Wt%	≤5.0
Max.operating Temp.	°C	800
Crush strength	MPa	≥130
Moh’s Hardness	Scale	≥7

   

Type	Void Rate	Piece Thickness	Heaping Density	Wave Crest Height (mm)	Fetch Of Wave	Incline Angle	Filling Factor	Theoretical Plate Number
100Y	87.5	2.5±0.5	300	30	50	80	3.5
125Y	85	2.5±0.5	370	23	42	80	3	1-1.5
160Y	84	2.2±0.2	384	17	30	80	2.8	1.5-2
250Y	82	1.4±0.2	450	13	22	80	2.5	2-3
350Y	80	1.2±0.2	490	9	15	80	2	3.5-4
450Y	76	1±0.2	552	6	11	80	1.5-2	4-5
550Y(X)	74	0.8±0.2	620	5	10	80	1.0-1.3	6-7
700Y(X)	72	0.8±0.2	650	4.5	8	80	1.2-1.4	5-6

Application : sulfuric Acid Plants

                       Regenerative Thermal Oxidizers

                       Chlorine Cooling and Drying Towers

                       Bromine and Hydrochloric Acid Plants

                       Liquid Organic Waste Disposal Coolers and Scrubbers

                       Natural Gas Treating and Dehydration Units

                       Purification of Aqueous Organic Acids

    

Packing : wooden crate, inside softness material.

              Other packing is available upon your request.

    Characteristics: Separation of Chloroacetic acid, Aceticacid, Actic anhydrides under the temperature of 20°C to 140°C.

Ceramic Structured packings for rectification, absorption