Ceramic corrugated structured packing for separation or absorption

Ceramic corrugated Separation of chloroacetic acid, aceticacid, acetic anhydridee underthe temperature of 20 degree to 140 degre

Ceramic Corrugated-plate Packing:

It is a columniform packing which is made of many parallel, congruence packing unit. Due to unique structure, good performance, ceramic surface can generate extremely thin film liquid flow and tortuous vapor flow passages promote mixing of liquid and vapor, at the same time, general little pressure drop. Structured packing have the same transfer efficiency as metal packing and much more resistant to corrosion and high temperature than metal packing. the surface of itself could promote wetting and keep liquid hold-up to minimum.

Technical Parameter:

TYPICAL CHEMICAL ANALYSIS (wt. %)	DATA
SiO2	≥72
Al2O3	≥23
Calcia, CaO	≤1.0
MgO	≤1.0
Fe2O3	≤0.5
Other	2

TYPICAL PHYSICAL PROPERTIES	DATA
Specific gravity (g/cm3)	2.5
Water absorption (wt%)	≤0.5
Acid resistance (wt%)	≥99.5
Loss in burn (wt%)	≤5.0
Max. operating Temp. (°C)	800
Crush strength (MPa)	≥130
Moh’s Hardness (Scale)

Type	Void Rate	Piece Thickness	Heaping Density	Wave Crest Height (mm)	Fetch Of Wave	Incline Angle	Filling Factor	Theoretical Plate Number
100Y	87.5	2.5±0.5	300	30	50	80	3.5	1
125Y	85	2.5±0.5	370	23	42	80	3	1-1.5
160Y	84	2.2±0.2	384	17	30	80	2.8	1.5-2
250Y	82	1.4±0.2	450	13	22	80	2.5	2-3
350Y	80	1.2±0.2	490	9	15	80	2	3.5-4
450Y	76	1±0.2	552	6	11	80	1.5-2	4-5
550Y(X)	74	0.8±0.2	620	5	10	80	1.0-1.3	6-7
700Y(X)	72	0.8±0.2	650	4.5	8	80	1.2-1.4	5-6

Physical & Chemical properties:

Acid resistance: more than 99.8 %

Thermal resistance: more than 1000 degree

Mohs Hardness: more than 7

Compressive strength: more than 2.0 Mpa

Mainly application:

1. Sulfuric and Acid Plants

2. Regenerative thermal Oxidizers

3. Chlorine Cooling and Drying Towers

4. Bromine and Hydrochloric Acid Plants

5. Liquid Organic Waste Disposal Coolers and Scrubbers

6. Natural Gas Treating and Dehydration Units

7. Purification of Aqueous Organic Acids

100X

    Specially suitable for refinery of oil with high content of sulfur, JINTAI Ceramic Structured Packings are of excellent acid resistant performance. It is a good choice desulfurization apparatus.

250X/Y

     Widely used in the separations for mineral reactant solutions, rectify distillation of organic acid solutions as well absorption/recovery of sulfur acid solution.

350X/Y

      Widely used in the acid dehydrators to reduce reflux, increase acetic acid and lower column operation temperature. Excellent separation performance for high vacuum distillation, such as glass industry which needs high temperature resistant and corrosive resistant packing.

450X/Y

       Widely used in absorption, desorption, Separation of corrosive system of fine vacuum distillation requiring the theoretical plate 4-5, economic loading range: F factor 1.5-2.

700 X

      Specially designed for the high mass-transfer efficiency fine rectifies distillation of corrosive system which produces high quality and high purity products.

Note: every 3 to 4 meters high of this structured packing, a support grid should be installed. We also have: Ceramic Corrugated Structure Packing with holes.

Ceramic corrugated structured packing for separation or absorption